Siemens SINAMICS S150 NEMA, Руководство по эксплуатации

Страница: 306 / 862

Operation
6.6 Control via the operator panel
Enclosed Drives
304
Operating Instructions, 12/2018, A5E36652151A
Background recording (factory setting: No)
● YES: Values are still recorded, even if the display screen is exited. When the screen is
entered again, the recorded prehistory is displayed.
● NO: The recording is stopped when the curve recorder is exited.
Y scale mode (factory setting: Auto), specifies the representation of the trend
● Auto: Scaling is done automatically (making the best possible use of the display height).
● Manual: Scaling is done manually by entering the range limits MIN/MAX. If, in this mode,
values that are outside the defined window occur, the limit is automatically adapted for
the display so that actual measured values can always be recorded.
Setting the date/time (for date stamping of error messages)
In this menu, you set the date and time.
You can also set whether and/or how the AOP and drive unit are to be synchronized.
Synchronization of the AOP with the drive enables error messages to be date- and time-
stamped.
Note
Display format for the time
The drive unit displays the time in parameter r3102 in the UTC format (days/milliseconds
since 1970-01-01).
Under "Additional settings", settings for synchronization can be made:
Synchronization (factory setting: None)
● None
The times for the AOP and drive unit are not synchronized.
● AOP -> Drive
–
If you activate this option, the AOP and drive unit are synchronized immediately
whereby the current AOP time is transferred to the drive unit.
– The current AOP time is transferred to the drive unit every time the AOP is started.
– Depending on the set synchronization interval, the current AOP time is transferred to
the drive unit.