Siemens SINAMICS S150 NEMA, Руководство по эксплуатации

Страница: 232 / 862

Commissioning
5.3 Procedure for commissioning with STARTER
Enclosed Drives
230
Operating Instructions, 12/2018, A5E36652151A
Figure 5-29 Entering encoder data – User-defined encoder data – Example: HTL encoder
⇒ Enter the required encoder data.
⇒ Under the Details tab, special encoder properties can be set, for example, gear ratio, fine
resolution, inversion, measuring gear position tracking.
⇒ Click OK.
NOTICE
Material damage when selecting the incorrect encoder supply voltage for option K50
For option K50, once the encoder has been commissioned, the supply voltage (5/24 V) set
for the encoder is activated on the SMC30 module. If a 5 V encoder is connected and the
supply voltage has not been set correctly, the encoder may be damaged.
• Set the correct supply voltage for the connected encoder.