Siemens RUGGEDCOM RX1510, Руководство пользователя

Страница: 431 / 856

RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Managing Rules 399
Section 5.17.14
Managing Rules
Rules establish exceptions to the default firewall policies for certain types of traffic, sources or destinations. Each
rule defines specific criteria. If an incoming packet matches that criteria, the default policy is overridden and the
action defined by the rule is applied.
The following sections describe how to configure and manage rules for a firewall:
•
Section 5.17.14.1, “Viewing a List of Rules”
• Section 5.17.14.2, “Adding a Rule”
• Section 5.17.14.3, “Configuring the Source Zone”
• Section 5.17.14.4, “Configuring the Destination Zone”
• Section 5.17.14.5, “Deleting Rules”
Section 5.17.14.1
Viewing a List of Rules
To view a list of rules, navigate to security » firewall » fwconfig » {firewall} » fwrule , where {firewall} is the
name of the firewall. If rules have been configured, the Main Rule Settings table appears.
Figure 438: Main Rule Settings Table
If no rules have been configured, add rules as needed. For more information, refer to Section 5.17.14.2, “Adding
a Rule” .
Section 5.17.14.2
Adding a Rule
To configure a rule for a firewall, do the following:
1. Change the mode to
Edit Private or Edit Exclusive .
2. Navigate to security » firewall » fwconfig » {firewall} » fwrule , where {firewall} is the name of the firewall.
3. Click <Add fwrule> in the menu. The Key Settings form appears.