manualshive.com logo in svg

SCIEX X500 QTOF, Руководство пользователя системы

Поделиться
Скачать
SCIEX X500 QTOF Скачать руководство пользователя страница 46

4. Select either the integrated system or the mass spectrometer.

The Included check box is selected.

5. Click 

Edit

.

The Device dialog opens.

6. Edit the devices as required.

• Click 

 Settings

 to view information about the device components, restore device default values, and test

the device.

• Click 

Test Device

 to verify that the device is configured correctly and available for use.

7. Click 

Test Device

.

If the test is successful, then a green informational message is shown. Otherwise, an informational message
indicates that the configuration is not valid and requires updates.

8. Click 

Save

.

9. Click 

Activate Devices

.

All of the devices that are selected in the Devices list are activated.

Delete Devices

Note: 

 If the device that is being deleted is part of an integrated system, then all of the devices in the integrated

system are deleted. Users cannot delete one device in an integrated system.

1. Open the Configuration workspace

2. Click 

Devices

 in the left panel.

3. Click 

Deactivate

.

4. Select a device.

5. Click 

Delete

.

6. Click 

Activate Devices

.

All of the devices that are selected in the Devices list are activated.

Deactivate Devices

1. Open the Configuration workspace.

2. Click 

Devices

 in the left panel.

System User Guide

SCIEX X500 QTOF System

RUO-IDV-05-2334-E

46 / 234

Configure Devices

Содержание X500 QTOF











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды