manualshive.com logo in svg

SCIEX X500 QTOF, Руководство пользователя системы

Поделиться
Скачать
SCIEX X500 QTOF Скачать руководство пользователя страница 13

•

Buffers

• Ammonium acetate; less than 1%

• Ammonium formate; less than 1%

• Phosphate; less than 1%

•

Acids and Bases

• Formic acid; less than 1%

• Acetic acid; less than 1%

• Trifluoroacetic acid (TFA); less than 1%

• Heptafluorobutyric acid (HFBA); less than 1%

• Ammonia/ammonium hydroxide; less than 1%

• Phosphoric acid; less than 1%

• Trimethylamine; less than 1%

• Triethylamine; less than 1%

Ventilation Precautions

The venting of fumes and disposal of waste must comply with all of the federal, state, provincial, and local health
and safety regulations. It is the responsibility of the customer to make sure that the air quality is maintained in
compliance with local health and safety regulations.

The source exhaust system and roughing pump must be vented to a dedicated laboratory fume hood or an external
exhaust system.

WARNING! Fire Hazard. Make sure that the source exhaust system is connected and
functioning to prevent flammable vapor from accumulating in the ion source.

WARNING! Radiation Hazard, Biohazard, or Toxic Chemical Hazard. Take care
to vent exhaust gases to a dedicated laboratory fume hood or exhaust system
and make sure that the ventilation tubing is secured with clamps. Make sure
that the laboratory has appropriate air exchange for the work performed.

SCIEX X500 QTOF System

System User Guide

13 / 234

RUO-IDV-05-2334-E

Operational Precautions and Limitations

Содержание X500 QTOF











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды