manualshive.com logo in svg

SCIEX X500 QTOF, Руководство пользователя системы

Поделиться
Скачать
SCIEX X500 QTOF Скачать руководство пользователя страница 203

• Cleaning solution. Use one of:

• 100% methanol

• 100% isopropanol

• 1:1 acetonitrile:water solution (freshly prepared)

• 1:1 acetonitrile:water with 0.1% acetic acid solution (freshly prepared)

• Clean 1 L or 500 mL glass beaker to prepare cleaning solutions

• 1 L beaker to catch used solvent

• Organic waste container

• Lint-free wipes. Refer to 

Tools and Supplies Available from the Manufacturer on page 203

.

• (Optional) Polyester (poly) swabs

Tools and Supplies Available from the Manufacturer

Part Number

Description

1017396

Small poly swab (thermally bonded). Also available in the Cleaning kit.

018027

Lint-free wipe (11 cm x 21 cm, 4.3 inches x 8.3 inches). Also available in the Cleaning
kit.

Cleaning Best Practices

WARNING! Hot Surface Hazard. Let the ion source cool for at least 30 minutes before
starting any maintenance procedures. Surfaces of the ion source and the vacuum
interface components become hot during operation.

WARNING!  Toxic Chemical Hazard. Refer to the chemical product Safety Data Sheets
and follow all of the recommended safety procedures when handling, storing, and
disposing of chemicals. For health and safety precautions, refer to the System User
Guide.

WARNING!  Radiation Hazard, Biohazard, or Toxic Chemical Hazard. Determine
whether decontamination is required prior to cleaning or maintenance. The
customer must decontaminate the system prior to cleaning or maintenance
if radioactive materials, biological agents, or toxic chemicals have been used
with the system.

SCIEX X500 QTOF System

System User Guide

203 / 234

RUO-IDV-05-2334-E

Service and Maintenance Information

Содержание X500 QTOF











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды