manualshive.com logo in svg

SCIEX X500 QTOF, Руководство пользователя системы

Поделиться
Скачать
SCIEX X500 QTOF Скачать руководство пользователя страница 10

International

•

Electromagnetic Compatibility (EMC):

• IEC 61326-1

• IEC CISPR 11 (Class A)

• IEC 61000-3-2

• IEC 61000-3-3
Refer to 

Electromagnetic Compatibility on page 15

.

•

Safety:

• IEC 61010-1

• IEC 61010-2-061

Electrical Precautions

WARNING! Electrical Shock Hazard. Do not remove the covers. Removing the covers
might cause injury or malfunctioning of the system. The covers need not be removed
for routine maintenance, inspection, or adjustment. Contact a SCIEX Field Service
Employee (FSE) for repairs that require the covers to be removed.

• Follow required electrical safe work practices.

• Use cable management practices to control electrical cables. This will reduce the chance of a tripping hazard.

For information about system electrical specifications, refer to the 

Site Planning Guide

.

AC Mains Supply

Connect the system to a compatible AC mains supply as instructed in this guide.

WARNING! Electrical Shock Hazard. Use only qualified personnel for the installation
of all of the electrical supplies and fixtures, and make sure that all of the installations
adhere to local regulations and safety standards.

WARNING! Electrical Shock Hazard. Make sure that the system can be disconnected
from the mains supply outlet in an emergency. Do not block the mains supply outlet.

System User Guide

SCIEX X500 QTOF System

RUO-IDV-05-2334-E

10 / 234

Operational Precautions and Limitations

Содержание X500 QTOF











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды