5. If required, click
New
to create a new processing method or click
Edit
to edit an existing processing method.
Refer to
Create a Processing Method on page 148
6. Select a comparison sample for non-targeted workflows.
7. Click
Process
.
8. To show or hide sample types, click
Sample Type
and then select or clear the required check boxes.
9. To set the acceptance filters, click
Acceptance
and then select or clear the required check boxes.
10. To select qualitative confidence filters, click the
Confidence
traffic light and then select or clear the required
check boxes.
Note:
After the Results Table is generated using the AutoPeak algorithm, if the user changes the XIC width
and the expected RT, then the data will be reprocessed using the old algorithm model unless the user updates
the model using the new XIC width and Expected RT values.
Refer to:
•
Sample Type Filter on page 153
•
About Results Tables on page 150
•
Acceptance Criteria on page 153
•
Confidence Traffic Lights on page 154
Add Samples
This option adds additional samples to a currently active Results Table.
1. With a
Results Table
open, click
Results > Add samples.
2. In the
Select Samples
dialog, select the required samples.
• The
Available
pane shows the subfolders, .wiff2 files, and samples available in the
Data
folder for the
selected folder.
• Expand individual folders to see any subfolders or .wiff2 files. If the .wiff2 file is expanded, it opens to
show the available samples.
• Use the arrows to add or remove samples.
• Select samples by double-clicking an individual sample, by selecting a sample or data file and then clicking
the => button, or by dragging a sample or data file from the left pane to the right one. Press
Shift
or
Ctrl
to select multiple files or samples before moving them.
3. Click
OK
.
A progress bar is shown while the new samples are integrated and added to the existing table.
System User Guide
SCIEX X500 QTOF System
RUO-IDV-05-2334-E
152 / 234
Operating Instructions—Software
