manualshive.com logo in svg

SCIEX X500 QTOF, Руководство пользователя системы

Поделиться
Скачать
SCIEX X500 QTOF Скачать руководство пользователя страница 170

8. If a chromatogram contains multiple peaks and an incorrect peak is integrated, then drag across the correct

peak to set a new expected retention time. If required, adjust the peak finding and integration parameters.

9. To apply the new parameters to all of the other samples, for the same component, right-click in the

chromatogram and then click 

Update Quantitation Method for Component

.

Tip! 

Integrated peaks can also be viewed by clicking the 

Starts ‘slide show’ peak review mode

 icon.

Click the 

Displays the peak review

 icon and then click the 

Starts 'slide show' peak review

 icon.

Tip! 

Clear the integration by clicking 

Set Peak to ‘Not found’

. The user can see the raw data before

manually integrating the peak.

10. Click the 

Enable Manual Integration Mode

 icon in the Peak Review pane to use the manual integration

mode.

11. Drag the cursor from the base of one side of the peak of interest to the other.

The peak is now manually integrated and the integration parameters used previously are unavailable.

Tip! 

If the peak has just been modified, then revert the peak to the original method by right-clicking and

then clicking 

Revert Peak to Original Method

.

View Options

In an open Peak Review pane, click 

View

.

Table 6-21 View Options

Description

Label

Click to view the chromatograms only.

XIC

Click to view the chromatograms from different samples side-by-side. Users can select
up to six samples to compare the peak responses across the samples.

XIC side by side

Click to view the chromatogram and MS spectrum as well as the Formula Finder Results
if they are available. If the formula is defined in the processing method, then the
theoretical MS spectrum can also be viewed.

XIC + MS

Click to view the chromatogram and MS/MS spectrum (if acquired), and the Library
Search Result if it is available. If there is a library hit, then the library MS/MS spectrum
can also be viewed.

XIC + MS/MS

Click to view the chromatogram, MS spectrum (and Formula Finder result), and MS/MS
spectrum (and Library Search result). The theoretical MS spectrum and library MS/MS
spectrum can also be viewed if they are available.

XIC + MS + MS/MS

System User Guide

SCIEX X500 QTOF System

RUO-IDV-05-2334-E

170 / 234

Operating Instructions—Software

Содержание X500 QTOF











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды