manualshive.com logo in svg

SCIEX X500 QTOF, Руководство пользователя системы

Поделиться
Скачать
SCIEX X500 QTOF Скачать руководство пользователя страница 142

Export the Peak List as Text

The user can save the peak list for the currently active spectrum or chromatogram to a tab-delimited text file. This
file contains information such as the centroid x-value (mass or time), peak area, height, and so on.

1. Open the Explorer workspace.

2. Click 

File > Open Multiple Samples.

Figure 6-46 File Menu—Options

3. In the Select Samples dialog, select the samples from the 

Available

 list and then click the arrow to move the

files to the 

Selected

 list.

Tip! 

To select one sample, expand the file, click the sample, and then click the arrow.

4. Click 

OK

.

5. Click 

File > Export > Peak List as Text.

6. Type a file name.

7. Click 

Save

.

Print Data

1. Open the Explorer workspace.

2. Click 

File > Open Multiple Samples.

System User Guide

SCIEX X500 QTOF System

RUO-IDV-05-2334-E

142 / 234

Operating Instructions—Software

Содержание X500 QTOF











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды