SCIEX X500 QTOF, Руководство пользователя системы

Страница: 200 / 234

Table 7-1 Maintenance Tasks (continued)
For more information... Task Frequency Component
Mass Spectrometer
Refer to Clean the Curtain Plate on
page 206 .
Clean Daily Curtain plate
Refer to Clean the Front of the Orifice
Plate on page 207 .
Clean Daily Orifice plate (front)
Refer to Inspect the Roughing Pump Oil
Level on page 211 .
Inspect the level Weekly Roughing pump oil
Contact the local QMP or FSE. Replace Every three years or as needed Roughing pump oil
Refer to Clean the Surfaces on page
201 .
Clean As needed Instrument
surfaces
Refer to Empty the Source Exhaust
Drain Bottle on page 207 .
Empty As needed Source exhaust
drain bottle
Contact the local QMP or FSE. Clean As needed Orifice plate (front
and rear)
Contact the local QMP or FSE. Clean As needed QJet
®
ion guide
and IQ0 lens
Contact the local QMP or FSE. Clean As needed Q0 rod set and IQ1
lens
Contact the local QMP or FSE. Refill As needed Roughing pump oil
Contact the local QMP or FSE. Replace As needed Interface heater
Refer to Replace the CDS Bottle on
page 41 .
Replace or refill As needed CDS bottle
Refer to Replace the Check Valve and
Flow Module on page 210 .
Replace As needed CDS flow module
Ion Source
Refer to the ion source Operator
Guide .
Inspect and replace As needed Twin ESI or twin
APCI electrodes
Refer to the ion source Operator
Guide .
Replace As needed Corona discharge
needle
System User Guide SCIEX X500 QTOF System
RUO-IDV-05-2334-E 200 / 234
Service and Maintenance Information