RKC INSTRUMENT COM-JG, Инструкция по эксплуатации

Страница: 104 / 126

8. USAGE EXAMPLE
IMR01Y35-E3
98
3. Enter the set values for “Number of continuous accesses” in QW10 to QW16 of “Modify value.”
To decide the set values of “Number of continuous accesses,” refer to
8.4 Contents Check of
COM-JG Initial Setting (P. 63) .
QW10: First module (Z-TIO): 4
QW12: Second module (Z-TIO): 4
QW14: Third module (Z-TIO): 2
QW16: Fourth module (Z-DIO): 1
Set the number of channels of each module in QW10 to QW14.
The set value of QW16 is “1” because the communication item of the corresponding
Z-DIO module is module-based data.
Address Symbol Display
format Status value Modify value
1 IB 2 HEX B#16#00
2 QB 0 HEX B#16#00
3
4 IW 10 DEC 4
5 IW 12 DEC 4
6 IW 14 DEC 4
7 IW 16 DEC 4
8
9 QW 10 DEC 0 4
10 QW 12 DEC 0 4
11 QW 14 DEC 0 2
12 QW 16 DEC 0 1
4. Click the “Modify variable” button on the toolbar to write static data to the COM-JG.
Enter the set values for
“
Number of continuous
accesses
”
Click the “Modify
variable” button