RKC INSTRUMENT COM-JG, Инструкция по эксплуатации

Страница: 77 / 126

8. USAGE EXAMPLE
IMR01Y35-E3 71
In the COM-JG initial settings, the number of data that is read or written varies by setting
item and thus the procedure must be repeated for each setting item. However, when the
number of data read or written is the same, such as for “Static data read range” and “Static
data write range”, the settings can be configured together.
For details, refer to Instruction Manual of the Programming Software STEP7.
To Communication
item setting
Creating a variable table
Monitor and modify
of variable
Refer to 8.5.3 COM-JG initial setting
Creating a variable table (P. 91)
Refer to 8.5.3 COM-JG initial setting
Monitor and modify of variable (P. 97)
Save and compilation
of project
Refer to 8.5.3 COM-JG initial setting
Save and compilation of project (P. 90)
Continued from the previous page.
Configuration setting
Refer to 8.5.3 COM-JG initial setting
Configuration setting (P. 86)
Refer to 8.5.4 Communication item
setting (P. 102)