Product
Product
Manual
Manual
Power
Power
inverter/ups
inverter/ups
Shenzhen
Shenzhen
ORO
ORO
Power
Power
Equipment
Equipment
CO.,LTD
CO.,LTD
Address
Address
:
:
Dunfa
Dunfa
industrial
industrial
park,
park,
Building
Building
6
6
layer,
layer,
Hangcheng
Hangcheng
Road
Road
,Xixiang
,Xixiang
Gushu,Baoan
Gushu,Baoan
District,Shenzhen,Guangdong,China
District,Shenzhen,Guangdong,China
Before designing and during the production, the safety of operators and products all have been
considered. Please following this users instructions strictly to operate or install the machine in
case of personal injury or accident occur.
(1)The installation of the inverter should be done by professionals or under the assistance of the local
dealer.
(2)Verify whether the input DC voltage range meets the requirements ±15% and the correctness of
voltage polarity.
(3)Confirm the grade of load device voltage ,power should not be more than rated output power of
the inverter
(4)Do not flow any liquid inside the inverter, or with a damp cloth to wipe the machine casing. Can
not be directly Contact the inverter input and output terminals when the machine is running,
especially with wet hands, otherwise electric shock injury will occur.
(5)If you need to change the working environment under the normal working state, do not change its
connection, your operated should be assistance and confirmation by the professionals or supplier.
(6)The operating environment of inverter should be well-ventilated, temperature range -20-45
degrees, keep away from the ignition sources spot and direct sunlight, Can not run in the
condensation, dust environment. During the operating, the heat is normal phenomenon, should
maintain the ventilation, clean installation environment, in particular, can not block the ventilation
holes.
(7)Minors can not use this product.
(8)Confirm weather the inverter can be connected with the earth wire,Live line and Zero line can not
