RKC INSTRUMENT COM-JG, Инструкция по эксплуатации, Страница: 99 / 126

8. USAGE EXAMPLE
IMR01Y35-E3 93
4. Set the read item of write permission flag register.
In the configuration settings, the PLC register addresses of the write permission flag register
(“Write permission”) are set as follows:
Input Start address (I Address): 2
End address (I Address): 2 (Automatically assigned)
As such, set “IB2” in “Address” of the variable table.
(IB2: A one-byte data area is allocated in address 2 and the data of address 2 is read.)
5. Set the write item of write permission flag register.
In the configuration settings, the PLC register addresses of the write permission flag register
(“Write permission”) are set as follows:
Output Start address (Q Address): 0
End address (Q Address): 0 (Automatically assigned)
As such, set “QB0” in “Address” of the variable table.
(QB0: A one-byte data area is allocated in address 0 and the data of address 0 is written.)