Command reference
R&S
®
ZNL/ZNLE
718
User Manual 1178.5966.02 ─ 19
CALCulate:RIPPle...
The
CALCulate:RIPPle...
commands define the ripple limits and control the ripple
limit check.
......................................................................................718
CALCulate<Chn>:RIPPle:CONTrol:DOMain
......................................................................718
.......................................................................................719
CALCulate<Chn>:RIPPle:DELete:ALL
..............................................................................720
CALCulate:RIPPle:DISPlay:RESult:ALL[:STATe]
............................................................... 720
CALCulate<Chn>:RIPPle:DISPlay[:STATe]
....................................................................... 721
.......................................................................................721
..........................................................................................721
CALCulate<Chn>:RIPPle:RDOMain:FORMat
....................................................................722
CALCulate<Chn>:RIPPle:SEGMent:COUNt?
....................................................................722
CALCulate<Chn>:RIPPle:SEGMent<Seg>:LIMit
............................................................... 723
CALCulate<Chn>:RIPPle:SEGMent<Seg>:RESult?
...........................................................723
CALCulate<Chn>:RIPPle:SEGMent<Seg>[:STATe]
........................................................... 724
CALCulate<Chn>:RIPPle:SEGMent<Seg>:STIMulus:STARt
...............................................724
CALCulate<Chn>:RIPPle:SEGMent<Seg>:STIMulus:STOP
............................................... 724
CALCulate<Chn>:RIPPle:SOUNd[:STATe]
........................................................................725
......................................................................................725
CALCulate<Chn>:RIPPle:STATe:AREA
............................................................................ 726
CALCulate<Chn>:RIPPle:CLEar
Resets the limit check results for the ripple test.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Usage:
Event
Manual operation:
See
CALCulate<Chn>:RIPPle:CONTrol:DOMain
<SweepType>
Deletes the existing ripple limit ranges and (re-)defines the physical units of the stimu-
lus values of the ripple limit lines. The unit of the ripple limit is defined via
CALCulate<Chn>:RIPPle:RDOMain:FORMat
.
Suffix:
<Chn>
.
Channel number used to identify the active trace
VNA command reference