What's new in firmware version 1.70
R&S
®
ZNL/ZNLE
22
User Manual 1178.5966.02 ─ 19
●
"Delay" memory traces used the current stimulus axis instead of the stored one
●
"Max Hold" traces: "Restart" and "Restart All" did not work
●
A memory trace with "Math" could not be recalled correctly if the original trace was
a wave
●
Considerable residual responses for some configurations
●
The analyzer GUI became slow if many markers were active
●
In FW versions 1.61 and higher, selecting a trace via
CALCulate<Ch>:PARameter:SELect <TraceName>
restarted the sweep
Spectrum analysis changes
The spectrum analysis function of the R&S
ZNL (with hardware option B1) and its addi-
tional software options are based on firmware 2.00 of the Rohde
&
Schwarz spectrum
analyzer R&S
FPL1000.
See the Release Notes of the R&S
FPL1000 (at
https://www.rohde-schwarz.com/firm-
) for a history of changes.
Firmware version 1.70