VNA GUI reference
R&S
®
ZNL/ZNLE
472
User Manual 1178.5966.02 ─ 19
10.12
Cal softtool
The "Cal" softtool provides all functions related to system error calibration and scalar
power calibration. The latter is available for R&S
ZNL only.
Access:
[Cal]
10.12.1
Start Cal tab
The "Start Cal" tab provides access to all functions for automatic or manual calibration.
Calibration of the R&S
ZNL/ZNLE is a fully guided process.
Background information
Refer to the following sections:
●
●
Chapter 9.5.5, "Automatic calibration"
●
Chapter 9.5.6, "Scalar power calibration"
●
10.12.1.1
Controls on the Start Cal tab
left = R&S
ZNL
right = R&S
ZNLE
●
The "Start Auto Cal" and "Start... (Cal Unit)" buttons are only active if a calibration
unit is connected to the analyzer.
●
If there is more than one channel in the current channel setup at the time you ini-
tiate a calibration, the
Channel Selection for Calibration dialog
Cal softtool