Command reference
R&S
®
ZNL/ZNLE
842
User Manual 1178.5966.02 ─ 19
INSTrument:TPORt:COUNt?
Returns the total number of test ports.
Because the R&S
ZNL/ZNLE doesn't support switch matrices, this is always the same
as the number of analyzer ports (see
Usage:
Query only
11.5.2.10
LAYOut commands
LAYout:CATalog[:WINDow]?
Queries the name and index of all active windows. Implements the correspondent
spectrum analysis command for VNA channel setups.
The result is a comma-separated list of window names and numbers:
'<Name of Window 1>',1,...,'<Name of Window n>',n
If the marker info table is active, it is returned at the last position (...,'Info',n).
Example:
HCOPy:DEST 'MMEM'
Prepare a hardcopy to a file.
MMEM:NAME 'C:\temp\hc_test.pdf'
Specify the target file path.
HCOPy:DEVice:LANGuage PDF
Select file type PDF.
HCOP:CONT WIND
Print multiple windows.
LAYout:CATalog?
Returns name and id of the active diagram areas and the the
marker info table (if active).
Suppose the marker info table is active.
HCOPy:PAGE:WINDow1:STATe 'VNA','Info',0
Exclude the marker info table from output.
HCOPy:IMMediate1
Print to file.
Usage:
Query only
11.5.2.11
MMEMory commands
The
MMEMory...
commands provide mass storage capabilities for the analyzer.
MMEMory:AKAL:FACTory:CONVersion
............................................................................ 843
................................................................................844
.......................................................................................845
.................................................................................................845
......................................................................................... 846
MMEMory:LOAD:CKIT:SDATa:WLABel
.............................................................................848
VNA command reference