R&S SMJ100A, Руководство по эксплуатации

Страница: 393 / 874

Instrument Function
R&S
®
SMJ100A
377 Operating Manual 1403.7458.32 ─ 14
Clock
Calls the "Clock" menu. The "Clock" menu is used to select the clock source (see
"Clock Settings" on page 389).
Remote command:
n.a.
Create Test Signal...
Selects the form of the test signal and calls the menu for generating it. A sinusoidal,
rectangular or test signal with constant I/Q can be selected.
See the corresponding section for detailed description of the parameters for the
selected test signal:
●
"Sine Test Signals" on page 391
●
"Rect Test Signal" on page 392
●
"Const IQ Test Signal" on page 393
Remote command:
n.a.
Multi Segment
Calls the menu for calculating multi segment waveforms (see Chapter 5.8.3.3, "Multi
Segment Waveforms" , on page 394).
Remote command:
n.a.
Multi Carrier
Calls the menu for calculating multi carrier waveforms (see Chapter 5.8.3.4, "Multi Car-
rier Waveforms" , on page 411).
Remote command:
n.a.
Trigger/Marker/Clock Settings
To access this dialog, select "Main Menu > Trigger/Marker".
The "Trigger In" section is where the trigger for the signal is set. Various parameters
will be provided for the settings, depending on which trigger source - internal or exter-
nal - is selected. The current status of signal generation ("Running" or "Stopped") is
indicated for all trigger modes.
The "Next Segmet Trigger In" is where the segment triggering is configured. This sec-
tion is enabled only for multi segment waferoms.
Baseband Signal - Baseband Block