R&S SMJ100A, Руководство по эксплуатации

Страница: 503 / 874

Remote Control Commands
R&S
®
SMJ100A
487 Operating Manual 1403.7458.32 ─ 14
*SAV <Number>
Save
Stores the current instrument settings under the specified number in an intermediate
memory. The settings can be recalled using the command
*RCL
with the associated
number.
To transfer the stored instrument settings in a file, use the command
:MMEMory:
STORe:STATe
.
Manual operation: See "Save" on page 160
*SRE <Contents>
Service request enable
Sets the service request enable register to the indicated value. This command deter-
mines under which conditions a service request is triggered.
Parameters:
<Contents> Contents of the service request enable register in decimal form.
Bit 6 (MSS mask bit) is always 0.
Range:
0 to 255
*STB?
Status byte query
Reads the contents of the status byte in decimal form.
Usage: Query only
*TRG
Trigger
Triggers all actions waiting for a trigger event. In particular, *TRG generates a manual
trigger signal. This common command complements the commands of the
TRIGger
subsystem.
Usage: Event
*TST?
Self-test query
Initiates self-tests of the instrument and returns an error code
Common Commands