R&S SMJ100A, Руководство по эксплуатации

Страница: 792 / 874

Remote Control Commands
R&S
®
SMJ100A
776 Operating Manual 1403.7458.32 ─ 14
Example: ROSC:SOUR EXT
selects the external source.
ROSC:EXT:FREQ 10 MHz
informs the instrument that the external reference has a fre-
quency of 10 MHz.
ROSC:EXT:SBAN WID
selects wideband setting for synchronization bandwidth.
Manual operation: See "Synchronization Bandwidth" on page 212
[:SOURce]:ROSCillator[:INTernal]:ADJust:VALue <Value>
Specifies the frequency correction value (adjustment value).
Parameters:
<Value> integer
Range:
0 to maximum value (see data sheet)
Increment: see data sheet
*RST:
---
Example: ROSC:ADJ:VAL 456
sets the adjustment value to 456.
Manual operation: See "Adjustment DAC Value" on page 212
[:SOURce]:ROSCillator[:INTernal]:ADJust[:STATe] <State>
Determines whether the calibrated (OFF) or a user-defined (ON) adjustment value is
used for fine adjustment of the frequency. With STATe ON, the instrument is no longer
in the calibrated state. However, the calibration value is not changed and the instru-
ment resumes the calibrated state after switching the Adjustment State to Off.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
--
Example: ROSC:SOUR INT
selects the internal source.
ROSC:ADJ ON
activates use of a user-defined adjustment value.
ROSC:ADJ:VAL 1400
sets the adjustment value to 1400.
Manual operation: See "Adjustment Active" on page 212
[:SOURce]:ROSCillator:SOURce <Source>
Selects the reference frequency source.
SOURce Subsystem