R&S SMJ100A, Руководство по эксплуатации, Страница: 556 / 874

Remote Control Commands
R&S
®
SMJ100A
540 Operating Manual 1403.7458.32 ─ 14
Example: HCOP:REG DIAL
Manual operation: See "File Options" on page 155
:HCOPy:PRINter:COLor[:STATe] <State>
Defines whether the hardcopy is printed in color or grayscale.
Parameters:
<State> 0 | 1 | OFF | ON
ON
prints in color.
OFF
prints in gray scale
*RST:
OFF
:HCOPy:PRINter:LIST?
The command queries the available printers. If the list is empty, no printer driver is
installed.
Return values:
<List> string
Example: HCOP:PRIN:LIST?
returns a list of the available printers.
Usage: Query only
:HCOPy:PRINter[:NAME] <Name>
The command selects the printer.
Parameters:
<Name> string
Example: HCOP:PRIN:NAME "printer1"
selects printer printer1.
:HCOPy:PRINter:PAGE:MARGins <Top>, <Bottom>, <Left>, <Right>
The command defines the margins of the paper for printing the hardcopy. The values
are entered in the sequence <top,bottom,left,right>, the values are separated by com-
mas. A dot is used as decimal separator. Depending on the set physical unit by the
parameter Unit, width and height are expressed in cm or inches.
Parameters:
<Top> float
Range:
0 to 356
Increment: 0.01
*RST:
2.5,2.5,2.5,2.5
HCOPy Subsystem