R&S SMJ100A, Руководство по эксплуатации, Страница: 717 / 874

Remote Control Commands
R&S
®
SMJ100A
701 Operating Manual 1403.7458.32 ─ 14
Return values:
<MLevel> string
Example: SOUR:CORR:CSET:DATA:POW:MLEV4?
queries the level correction values for attenuator setting 10 dB.
Usage: Query only
Manual operation: See "Multi Level Values" on page 232
[:SOURce<hw>]:CORRection:CSET:DATA:POWer:MLEVel:STATe <State>
The command activates the acquisition of multi level data with a connected power sen-
sor. Separate measurements are made for the different attenuator ranges up to 40 dB.
Thus, the changes in VSWR for the different ranges are taken into account, the level
accuracy increases. For ranges from 40 dB on the changes in VSWR are negligible.
The reference level is set internally and cannot be controlled by the user. The mea-
surement results are entered into additional columns of the User Correction list. The
Multi Level Correction measurements are made in addition to a Single Level Correction
measurement. When the user correction list is activated, it is possible to select which
of the measurements is to be used for level correction (command
SOUR:CORR:MLEV:STAT ON
).
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Example: SOUR:CORR:CSET:DATA:POW:MLEV:STAT ON
activates the acquisition of multi level data with a connected
power sensor.
Manual operation: See "Multi Level Values" on page 232
[:SOURce<hw>]:CORRection:CSET:DATA:POWer:SGAMma:STATe <State>
Activates the auto fill process to create a list with SGamma correction data.
SGamma correction is possible when the table is filled with multi level user correction
data.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Example: CORR:CSET:DATA:POW:SGAM:STAT ON
activates the acquisition of multi level gamma correction data
with a connected power sensor.
[:SOURce<hw>]:CORRection:CSET:DATA:SGAMma:DELete
Deletes SGamma correction values in the selected table.
SOURce Subsystem