manualshive.com logo in svg

R&S SMJ100A, Руководство по эксплуатации

Поделиться
Скачать
R&S SMJ100A Скачать руководство пользователя страница 290

Instrument Function

R&S

®

SMJ100A

274

Operating Manual 1403.7458.32 ─ 14

The list is processed from the beginning to the end of the list (modes "Auto", ("Exter-
nal") "Single", ("External") "Step").

5.5.15.1

List Mode Dialog

To open the "List Mode" menu, select "RF/A Mod > Configure > List Mode" or use the
MENU key under "RF/A Mod".

The menu is used to activate/deactivate the operating mode List, to create, select and
activate the lists, and to select the trigger mode and the dwell time.

General Settings

State - List Mode

Activates/deactivates the List mode. The currently selected list is processed.

In case of a new or modified list, the necessary hardware settings are automatically
determined on activation of the list mode. The data determined in this way is stored
along with the list and is available whenever the list is used again.

This means that when activating the list mode, the system checks whether any hard-
ware settings are present. If so, the list is started immediately, but if not they are auto-
matically determined (the list is learnt).

A "Learn List Mode Data" button is available for deliberately activating list learning.

Note: 

Activating the list mode automatically deactivates all sweeps. During list mode

the frequency and level indications do not display the currently set values.

Remote command: 

[:SOURce<hw>]:FREQuency:MODE

 

on page 716

Mode - List Mode

Selects the cycle mode of the List mode.

 

RF Signal and Analog Modulations - RF Block

Содержание SMJ100A











































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды