R&S SMJ100A, Руководство по эксплуатации

Страница: 621 / 874

Remote Control Commands
R&S
®
SMJ100A
605 Operating Manual 1403.7458.32 ─ 14
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:DELay:STEP <Step>
The command sets the step width by which the start delays of the carriers in the
defined carrier range will be incremented.
Parameters:
<Step> float
Range:
-1 to 1
Increment: 1E-9
*RST:
0
Default unit: s
Example: BB:ARB:MCAR:EDIT:CARR:DEL 5 us
sets a start delay of 5 us for the carriers in the carrier range.
BB:ARB:MCAR:EDIT:CARR:DEL:STEP 1 us
the start delay is incremented by 1us for each carrier, i.e. the
first carrier has a start delay of 5us, the second a start delay of 6
us, etc.
Manual operation: See "Delay Step" on page 421
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:DELay[:STARt] <Start>
The command sets the start delay for the individual carriers in the defined carrier
range. If the command
:BB:ARB:MCAR:EDIT:CARR:DEL:STEP
is used to define a
step width, the delay entered here applies only to the starting carrier. The delays of the
remaining carriers are stepped up or down by the delay value specified in
the
:BB:ARB:MCAR:EDIT:CARR:DEL:STEP
command.
Parameters:
<Start> float
Range:
0 to 1
Increment: 1E-9
*RST:
0
Default unit: s
Example: BB:ARB:MCAR:EDIT:CARR:DEL 5us
sets a start delay of 5 us for the carriers in the carrier range.
Manual operation: See "Delay Start" on page 421
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:EXECute
The command adopts the settings for the carrier range which has been defined using
the
:BB:ARB:MCAR:EDIT:CARR:...
commands.
SOURce Subsystem