R&S SMJ100A, Руководство по эксплуатации

Страница: 785 / 874

Remote Control Commands
R&S
®
SMJ100A
769 Operating Manual 1403.7458.32 ─ 14
Parameters:
<Power> Minimum level ... Maximum level
The value range for the level setting varies according to the
instrument model.
The values are given in the data sheet.
Increment: 0.01
*RST:
-30
Example: SOUR:POW:POW 15
sets the RF level at output to 15 dBm.
Manual operation: See "Amplitude" on page 217
[:SOURce<hw>]:POWer:STARt <Start>
Sets the start level for the RF sweep.
Note: You can select any level within the setting range. The range is defined by this
start value and the
[:SOURce<hw>]:POWer:STOP
value.
A defined offset (
[:SOURce<hw>]:POWer[:LEVel][:IMMediate]:OFFSet
)
affects the level values according to the formula:
Minimum level + OFFSet ... Maximum level + OFFSet
Parameters:
<Start> float
Determines the first level value of the sweep setting range.
Range:
full specified level range
Increment: see the data sheet: Level sweep > Step size setting
resolution
*RST: -30
Example: POW:STAR -20 dBm
sets the start level for the level sweep to -15 dBm for RF output
A.
Manual operation: See "Start Level - Level Sweep" on page 271
[:SOURce<hw>]:POWer:STEP[:INCRement] <Increment>
Sets the step width for POW:STEP:MODE USER .
To adjust the level step by step with this step size, use the
POW:UP
and
POW:UP
com-
mands.
Note: This value also applies to the step width of the rotary knob of the instrument and
increases or decreases the level accordingly, when you work in user-defined step
mode.
SOURce Subsystem