R&S SMJ100A, Руководство по эксплуатации

Страница: 178 / 874

Instrument Function
R&S
®
SMJ100A
162 Operating Manual 1403.7458.32 ─ 14
The name of the dialog is context sensitive but the provided functions are self-explana-
tory and very similar.
With the provided settings, you can perform the following:
●
to navigate through the file system, use the directory tree
●
to create a new file, load and store files, use the dedicated functions "New",
"Select", "Save" and
Recent files .
●
to perform standard file management functions, like create new directories, move,
copy, delete files and/or directories, use the standard "File Manager" function (see
"File Manager" on page 161).
Remote command:
to list all files in a directory:
:MMEMory:CDIRectory
on page 549
:MMEMory:CATalog?
on page 548
refer to the description of firmware options for the syntax of the corresponding SCPI
command:
[:SOURce<hw>]:BB:<Digital Standard>:SETTing:CATalog
[:SOURce]:CORRection:CSET:CATalog?
on page 699
to list files with user data:
[:SOURce<hw>]:BB:DM:DLISt:CATalog?
on page 655
[:SOURce<hw>]:BB:DM:CLISt:CATalog?
on page 655
Exclude Frequency
The current frequency is retained when a stored instrument setting is loaded.
Remote command:
[:SOURce<hw>]:FREQuency[:CW|FIXed]:RCL
on page 715
Exclude Level
The current level is retained when a stored instrument setting is loaded.
Remote command:
[:SOURce<hw>]:POWer[:LEVel][:IMMediate]:RCL
on page 766
Recall
Load the selected configuration.
If an instrument setting in which a sweep was activated is stored, the sweep is started
when the recall command is called.
If an instrument setting which accesses lists is stored, this list is also loaded.
If the list has been deleted in the meantime, an error message appears when the
instrument setting is loaded. If the list has been overwritten in the meantime, the new
entries will be used.
Remote command:
:MMEMory:LOAD:STATe
on page 552
*RCL
on page 486
Refer to the descriptions of the firmware options for the correct syntax of the corre-
sponding SCPI command:
[:SOURce<hw>]:BB:<Digital Standard>:SETTing:LOAD
General Instrument Settings