R&S SMJ100A, Руководство по эксплуатации, Страница: 564 / 874

Remote Control Commands
R&S
®
SMJ100A
548 Operating Manual 1403.7458.32 ─ 14
:MMEMory:MDIRectory
...................................................................................................552
:MMEMory:MOVE
.......................................................................................................... 552
:MMEMory:MSIS
............................................................................................................553
:MMEMory:RDIRectory
...................................................................................................553
:MMEMory:STORe:STATe
..............................................................................................553
:MMEMory:CATalog? <path>
Returns the content of a particular directory.
Query parameters:
<path> string
String parameter to specify the directory.
If you leave out the path, the command returns the contents of
the directory selected with
:MMEMory:CDIRectory
.
The path may be relative or absolute.
Return values:
<UsedDiskSpace> Byte size of all files in the directory.
<FreeDiskSpace> Remaining disk space in bytes.
<FileInfo> <NameFileN>,<SuffixFileN>,<SizeFileN>
List of files, separated by commas
<NameFileN>
Name of the file.
<SuffixFileN>
Type of the file. Possible suffixes are: ASCii, BINary, DIRectory
<SizeFileN>
Size of the file in bytes.
Example: See "Working with Files and Directories" on page 547.
Usage: Query only
Manual operation: See "Directory, File List and File Name" on page 160
:MMEMory:CATalog:LENGth? <Path>
Returns the number of files in the current or in the specified directory.
Query parameters:
<Path> string
String parameter to specify the directory. If the directory is omit-
ted, the command queries the content of the current directory,
queried with
:MMEMory:CDIRectory
command.
Return values:
<FileCount> integer
Number of files.
Example: See "Working with Files and Directories" on page 547.
MMEMory Subsystem