R&S SMJ100A, Руководство по эксплуатации, Страница: 568 / 874

Remote Control Commands
R&S
®
SMJ100A
552 Operating Manual 1403.7458.32 ─ 14
:MMEMory:LOAD:STATe <SavRclStateNumb>, <file_name>
Loads the specified file stored under the specified name in an internal memory.
After the file has been loaded, the instrument setting must be activated using an
*RCL
command.
Setting parameters:
<SavRclStateNumb> Determines to the specific <number> to be used with the
*RCL
command, e.g.
*RCL 4
.
<file_name> String parameter to specify the file name with extension
*.savrcl
.
Example: See "Storing and Loading Current Settings" on page 546.
Usage: Setting only
Manual operation: See "Recall" on page 162
:MMEMory:MDIRectory <Directory>
Creates a subdirectory for mass memory storage in the specified directory. If no direc-
tory is specified, a subdirectory is created in the default directory. This command can
also be used to create a directory tree.
Setting parameters:
<Directory> string
String parameter to specify the new directory.
Example: See "Working with Files and Directories" on page 547.
Usage: Event
Manual operation: See "Create New Directory" on page 167
:MMEMory:MOVE <SourceFile>, <DestinationFile>
Moves an existing file to a new location or, if no path is specified, renames an existing
file.
Setting parameters:
<SourceFile> string
String parameter to specify the name of the file to be moved.
<DestinationFile> string
String parameters to specify the name of the new file.
Example: See "Working with Files and Directories" on page 547.
Usage: Event
SCPI confirmed
Manual operation: See "Rename " on page 167
MMEMory Subsystem