R&S SMJ100A, Руководство по эксплуатации

Страница: 565 / 874

Remote Control Commands
R&S
®
SMJ100A
549 Operating Manual 1403.7458.32 ─ 14
Usage: Query only
:MMEMory:CDIRectory <Directory>
Changes the default directory for mass memory storage. The directory is used for all
subsequent
MMEM
commands if no path is specified with them.
Parameters:
<Directory> <directory_name>
String containing the path to another directory. The path can be
relative or absolute.
To change to a higher directory, use two dots '..' .
Example: See "Working with Files and Directories" on page 547.
Usage: SCPI confirmed
Manual operation: See "Directory, File List and File Name" on page 160
:MMEMory:COPY <SourceFile>[,<DestinationFile>]
Copies an existing file to a new file. Instead of just a file, this command can also be
used to copy a complete directory together with all its files.
Setting parameters:
<SourceFile> string
String containing the path and file name of the source file
<DestinationFile> string
String containing the path and name of the target file. The path
can be relative or absolute.
If
<DestinationFile>
is not specified, the
<SourceFile>
is
copied to the current directory, queried with the
:MMEMory:
CDIRectory
command.
Note: Existing files with the same name in the destination direc-
tory are overwritten without an error message.
Example: See "Working with Files and Directories" on page 547.
Usage: Setting only
SCPI confirmed
Manual operation: See "Copy " on page 166
:MMEMory:DATA <Filename>, <BinaryBlock>
:MMEMory:DATA? <Filename>
The setting command writes the block data
<BinaryBlock>
to the file identified by
<Filename>
. Set the GPIB-bus terminator to
EOI
to ensure correct data transfer.
MMEMory Subsystem