![background image](http://html2.mh-extra.com/html/rands/sgt100a/sgt100a_user-manual_3081093114.webp)
Signal Generator Settings
R&S
®
SGT100A
83
User Manual 1176.8674.02 ─ 07
Remote command:
[:SOURce<hw>]:BB:ARBitrary:CLOCk
Multi Segment
Calls the menu for calculating multi-segment waveforms (see
Remote command:
n.a.
Multi Carrier
Calls the dialog for calculating multi-carrier waveforms (see
Remote command:
n.a.
Create Test Signal...
Selects the form of the test signal and calls the menu for generating it. A sinusoidal,
rectangular or test signal with constant I/Q can be selected.
See the corresponding section for detailed description of the parameters for the
selected test signal:
●
Chapter 7.1.2.5, "Sine Test Signal"
●
Chapter 7.1.2.6, "Rect Test Signal"
●
Chapter 7.1.2.7, "Const I/Q Test Signal"
Remote command:
n.a.
7.1.2.3
Multi-Segment Waveforms
Modern chip technologies implement several communication standards within one chip
and rise special verification and test requirements. To fulfill the requirements of these
test systems and to enable rapid alternation between different waveforms with differing
test signals, the R&S
SGT provides the functionality to generate multi-segment wave-
form files.
This section introduces the concept of the multi-segment waveform files, together with
description of the provided settings and some typical configuration examples.
Introduction
A multi-segment waveform is a composed signal containing multiple independent
waveforms called segments. Each segment represents a independent waveform that
can be output with its own marker and clock settings.
shows the principle of building a multi-segment waveform.
Baseband