![background image](http://html2.mh-extra.com/html/rands/sgt100a/sgt100a_user-manual_3081093460.webp)
Remote Control Commands
R&S
®
SGT100A
429
User Manual 1176.8674.02 ─ 07
Manual operation:
See
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:OFFSet:I
<I>
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:OFFSet:Q
<Q>
Sets an offset between the inverting and non-inverting input of the differential analog
I/Q output signal.
Parameters:
<Q>
float
Range:
-0.3 to 0.3
Increment: 1E-4
*RST:
0
Example:
:SOURce1:IQ:OUTPut:ANALog:TYPE DIFF
:SOURce1:IQ:OUTPut:ANALog:OFFSet:I 0.05 V
:SOURce1:IQ:OUTPut:ANALog:OFFSet:Q 0.05 V
Manual operation:
See
11.14.12 Analog I/Q Output
This section describes the commands of the output of an analog I/Q signal.
[:SOURce<hw>]:IQ:OUTPut:ANALog:STATe
.................................................................... 429
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:TYPE
....................................................................429
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:BIAS:COUPling[:STATe]
.........................................430
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:BIAS:I
................................................................... 430
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:BIAS:Q
................................................................. 430
.................................................................................. 430
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:MODE
...................................................................431
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:OFFSet:I
............................................................... 431
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:OFFSet:Q
..............................................................431
[:SOURce<hw>]:IQ:OUTPut:ANALog:STATe
<State>
Activates the specified analog I/Q output.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
0
Example:
SOURce:IQ:OUTPut:ANALog:STATe ON
Activates the output of the analog I/Q signal on the I/Q OUT 1
connectors.
Manual operation:
See
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:TYPE
<Type>
Sets the type of the analog signal.
SOURce Subsystem