![background image](http://html2.mh-extra.com/html/rands/sgt100a/sgt100a_user-manual_3081093503.webp)
Remote Control Commands
R&S
®
SGT100A
472
User Manual 1176.8674.02 ─ 07
Parameters:
<Value>
integer
Range:
Min to Max
*RST:
32767
Manual operation:
See
11.15 STATus Subsystem
This system contains the commands for the status reporting system. See also
ter 15.1.5, "Status Reporting System"
on page 537 for detailed information.
on page 307 has no effect on the status registers.
Value ranges
●
Queries return the current value of the respective register, which permits a check of
the device status.
Return values: A decimal value in the range 0 to 32767 (=2
15
-1)
●
The configuration commands set the respective register thus determining which
status changes of the R&S
SGT cause the status registers to be changed.
Setting values: A decimal value in the range 0 to 32767 (=2
15
-1)
...................................................................................... 472
.......................................................................................... 473
.......................................................................................... 473
....................................................................................473
.................................................................................... 473
:STATus:QUEStionable:CONDition
..................................................................................474
...................................................................................... 474
......................................................................................474
:STATus:QUEStionable:NTRansition
................................................................................475
:STATus:QUEStionable:PTRansition
................................................................................475
............................................................................................... 475
:STATus:OPERation:CONDition
<Condition>
Sets the content of the CONDition part of the STATus:OPERation register. This part
contains information on the action currently being performed in the instrument. The
content is not deleted after being read out because it indicates the current hardware
status.
Parameters:
<Condition>
string
Example:
:STATus:OPERation:CONDition?
queries the Status:Operation:Condition register.
STATus Subsystem