Instrument Tour
R&S
®
SGT100A
31
User Manual 1176.8674.02 ─ 07
The RF ON key switches the RF signal on or off. If activated, the button is green.
REF EXT
The REF EXT LED indicates the status of the external reference.
●
Green indicates that the instrument can synchronize to the external clock.
●
Red indicates that the instrument cannot synchronize to the external clock.
●
No light indicates that the internal reference is used.
ERROR / WARNING
The ERROR / WARNING LED indicates the status of the R&S
SGT.
●
Red indicates that an error has occurred, e.g. temperature exceeded or power fail-
ure.
●
Blinking orange indicates a running process (e.g calibration, self test).
●
No light indicates that no errors or warnings have occurred.
For details on errors or warnings, refer to the graphical user interface on a remote PC
("SGMA-GUI > Info").
For more information, refer to the "Error Messages" section in the user manual.
LAN
Pressing the key for more than 3 s resets the LAN interface settings, i.e the "IP Adress
Mode" is reset to DHCP.
ID
Pressing the ID key while the instrument is active, opens the "SGMA-GUI > Setup >
Instruments > Configure Instruments > Edit Instrument" dialog of the corresponding
instrument on the remote controller.
Pressing the ID key of an inactive instrument and starting "SGMA-GUI > Setup >
Instruments > Scan", leads to an automatic activation of the instrument in the SGMA-
GUI.
Front Panel Tour
