R&S SGT100A, Руководство пользователя

Страница: 467 / 593

Remote Control Commands
R&S
®
SGT100A
436 User Manual 1176.8674.02 ─ 07
Parameters:
<ETrakIfcType> USER | ET1V2 | ET1V5 | ET2V0
*RST:
USER
Example: SOURce1:IQ:OUTPut:ANALog:ENVelope:ETRak ET2V0
Manual operation:
See "eTrak
®
Interface Type" on page 160
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:VREF <VoltageReferenc>
Defines whether the envelope voltage V
out
is set directly or it is estimated from the
selected supply voltage V
cc
.
Parameters:
<VoltageReferenc> VCC | VOUT
*RST:
VCC
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Manual operation: See "Envelope Voltage Reference" on page 160
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:DELay <Delay>
Enables a time delay of the generated envelope signal relative to the corresponding
RF signal.
Parameters:
<Delay> float
Range:
-500E-9 to 500E-9
Increment: 1E-12
*RST:
0
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Manual operation: See "Envelope to RF Delay" on page 166
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:FDPD <CalcFromDpdStat>
Enables calculation of the envelope from predistorted signal.
Parameters:
<CalcFromDpdStat> 0 | 1 | OFF | ON
*RST: 0
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Options: R&S SGT-K540/K541
Manual operation: See "Calculate Envelope form Predistorted Signal" on page 167
SOURce Subsystem