Signal Generator Settings
R&S
®
SGT100A
166
User Manual 1176.8674.02 ─ 07
1
= Enabled
2
= Envelope detector,
√
[I(t)
2
+Q(t)
2
]; indication changes, depending on the
3a, 3b =
(available in "Envelope Voltage Adaptation > Manual" mode
4
=
state and shaping function; grey background color = deactivated shaping
5
= Enabled
6
= Indicates the output connectors, depending on the
The dialog displays an
interactive
overview diagram of the ET processing chain.
The diagram displays information on shaping state, incl. current shaping method
and setting, like gains or delay.
Tip:
Hotspots for quick access. The displayed blocks are hotspots. Select one of
them to access the related function.
3. To shape the envelope signal, perform one of the following:
a) on the overview diagram, select the "Shaping" block
b) select "I/Q Analog Settings > Shaping"
Chapter 7.5.5, "Shaping Settings"
Calculate Envelope form Predistorted Signal
..............................................................167
Envelope to RF Delay
Sets the time delay of the generated envelope signal relative to the corresponding RF
signal. A positive value means that the envelope signal delays relative to the RF signal
and vice versa.
Generation of Envelope Tracking Signals