Remote Control Commands
R&S
®
SGT100A
372
User Manual 1176.8674.02 ─ 07
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:FILE
<File>
Selects the file with I/Q data to be modulated onto the selected carrier.
Parameters:
<File>
<file name>
Example:
BB:ARB:MCAR:CARR15:FILE "/var/user/IQ_wcdma"
selects file
IQ_wcdma
. The data of the file is modulated onto
carrier 15.
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:FREQuency
<Frequency>
Sets or indicates the carrier frequency, depending on the selected carrier frequency
mode.
The carrier frequnecy can be set in "Arbitrary Carrier frequency" mode. For "Equidis-
tant Carrier Spacing", the carrier spacing is determined automatically.
Parameters:
<Frequency>
integer
Vvalue range depends on the max bandwidth, see data sheet
Range:
-40E6 to 40E6
*RST:
0
Example:
BB:ARB:MCAR:CARR:MODE ARB
activates ARB multi carrier mode.
BB:ARB:MCAR:CARR:FREQ 5.0
sets 5.0 MHz carrier frequency.
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:PHASe
<Phase>
The command sets the start phase of the selected carrier.
The phase settings are only valid if optimization of the crest factor is disabled
(
:SOURce:BB:ARB:MCARrier:CFACtor:MODE OFF
).
Parameters:
<Phase>
float
Range:
0 to 359.99
Increment: 0.01
*RST:
0
Default unit: DEG
Example:
BB:ARB:MCAR:CARR15:PHAS 90 DEG
sets a start phase of 90° for carrier 15.
Manual operation:
See
SOURce Subsystem