R&S SGT100A, Руководство пользователя

Страница: 484 / 593

Remote Control Commands
R&S
®
SGT100A
453 User Manual 1176.8674.02 ─ 07
[:SOURce<hw>]:IQ:DPD:OUTPut:ITERations:MAX <MaxIterations>
Sets the maximum number of performed iterations to achieving the required error set
with
[:SOURce<hw>]:IQ:DPD:OUTPut:ERRor:MAX
.
Parameters:
<MaxIterations> integer
Range:
1 to 10
*RST: 3
Example: See Example "Defining correction coefficients and enabling digi-
tal predistortion" on page 447
[:SOURce<hw>]:IQ:DPD:MEASurement:STATe?
Queries whether the interactions are competed.
Return values:
<MeasureValidity> 0 | 1 | OFF | ON
*RST:
1
Example: See Example "Defining correction coefficients and enabling digi-
tal predistortion" on page 447
Usage: Query only
[:SOURce<hw>]:IQ:DPD:INPut:CFACtor?
[:SOURce<hw>]:IQ:DPD:OUTPut:CFACtor?
[:SOURce<hw>]:IQ:DPD:INPut:LEVel?
[:SOURce<hw>]:IQ:DPD:OUTPut:LEVel?
[:SOURce<hw>]:IQ:DPD:INPut:PEP?
[:SOURce<hw>]:IQ:DPD:OUTPut:PEP?
Queries the measured values the before and after the enabled digital predistortion.
Return values:
<PEP> float
The query returns
-1000
if the calculation is impossible or there
are no measurements results available.
Example: see Example "Defining correction coefficients and enabling digi-
tal predistortion" on page 447
Usage: Query only
Manual operation: See "Input/Output PEP, Level and Crest Factor" on page 187
[:SOURce<hw>]:IQ:DPD:PIN:MIN <PepInMin>
[:SOURce<hw>]:IQ:DPD:PIN:MAX <PepInMax>
Sets the value range of the input power.
SOURce Subsystem