Signal Generator Settings
R&S
®
SGT100A
234
User Manual 1176.8674.02 ─ 07
7.8 Connectors
The USER connectors of the R&S
SGT can be used for multiple purposes. In the "Con-
nector" dialog, the correct mode for each connector can be set, and additional settings
for some modes.
► To access this dialog select "SGMA-GUI > Instrument Name > Connectors"
Mode
Selects the mode for the correspondent connector. Some settings are only available
for connector USER 2.
"Marker 1/2"
Output for a defined marker signal.
"Trigger/ Trigger Out"
Input/output for an external trigger signal.
"Clock In/Out"
Input/Output for a clock signal.
"Sync In/Out"
Input/Output for SYNC signals used for SYNC-Mode in baseband.
"Next Trigger"
Input next segment for triggering of multi-segment waveform files.
"Signal Valid"
Output of high signal to mark valid frequency and level settings.
"Not Signal Valid"
Output of high signal to mark the transition state when frequency and
level change.
"Pulse Video Out"
Available only for USER 2.
Output of the internally generated pulse video (modulating) signal.
The video signal level corresponds to the RF envelope.
Connectors
