R&S SGT100A, Руководство пользователя

Страница: 458 / 593

Remote Control Commands
R&S
®
SGT100A
427 User Manual 1176.8674.02 ─ 07
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:SETTing:LOAD <Filename>
Loads the selected file from the default or the specified directory. Loaded are files with
extension
*.iqout
.
Setting parameters:
<Filename> "<filename>"
Filename or complete file path
Usage: Setting only
Manual operation: See "Save/Recall" on page 143
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:SETTing:DELete <Filename>
Deletes the selected file from the default or specified directory. Deleted are files with
the file extension
*.iqout
.
Setting parameters:
<Filename> "<filename>"
Filename or complete file path
Usage: Setting only
Manual operation: See "Save/Recall" on page 143
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:TYPE <Type>
Sets the type of the analog signal.
Parameters:
<Type> SINGle | DIFFerential
*RST:
SINGle
Example: SOURce1:IQ:OUTPup:ANALog:TYPE DIFFerential
Manual operation: See "I/Q Output Type" on page 143
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:BIAS:COUPling[:STATe] <State>
Couples the bias setting of the I and Q signal components.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Example: IQ:OUTP:BIAS:COUP ON
Activates I/Q bias coupling.
Manual operation: See "Couple I/Q Bias" on page 144
SOURce Subsystem