R&S SGT100A, Руководство пользователя

Страница: 470 / 593

Remote Control Commands
R&S
®
SGT100A
439 User Manual 1176.8674.02 ─ 07
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:BINPut <BipolarInput>
Enables the generation of a bipolar signal.
Parameters:
<BipolarInput> 0 | 1 | OFF | ON
*RST:
0
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Manual operation: See "Bipolar Input" on page 163
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:GAIN <Gain>
Sets the gain of the used external DC modulator.
Parameters:
<Gain> float
Range:
-50 to 50
Increment: 0.01
*RST:
0
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Manual operation: See "Gain" on page 163
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:VCC:OFFSet <VccOffset>
Applies a voltage offset on the supply voltage V
cc
.
Parameters:
<VccOffset> float
Range:
0 to 10
Increment: 1E-3
*RST:
0
Default unit: mV
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Manual operation: See "V
cc
Offset" on page 164
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:VCC:MIN <VccMin>
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:VCC:MAX <VccMax>
Sets the maximum value of the supply voltage V
cc
.
SOURce Subsystem