Signal Generator Settings
R&S
®
SGT100A
225
User Manual 1176.8674.02 ─ 07
The dialog contains all parameters for configuring the sensor settings, like average
or peak display, reference source, filter and level offset. It automatically displays a
separate tab per detected sensor, see
.
The remote commands required to define these settings are described in
ter 11.13, "SENSe, READ, INITiate and SLISt Subsystems"
on page 329, including
the triggering of the measurement and the retrieval of measurement results.
Serial Number
Indicates the type and the serial number of a connected R&S
NRP power sensor.
The displayed
Level (Peak) / Level (Average)
values correspond to the particular sen-
sor.
Remote command:
Level (Peak) / Level (Average)
Indicates the measured peak or average level value.
You can also change the unit for the results display: Watt, dBm or dB
μ
V.
Note:
Peak level measurements are provided if the power sensor supports this feature.
RF Settings
