R&S SGT100A, Руководство пользователя

Страница: 420 / 593

Remote Control Commands
R&S
®
SGT100A
389 User Manual 1176.8674.02 ─ 07
Example: See
[:SOURce<hw>]:BB:ARBitrary:WAVeform:
HDDStreaming:BLEVel?
on page 388
[:SOURce<hw>]:BB:ARBitrary:WAVeform:POINts?
The command queries the number of samples in the waveform file selected using com-
mand
:ARB:WAV:SEL
. Only the file name has to be entered. Only files with the file
extension
*.wv
will be read out.
Return values:
<Points> <waveform filename>
Range:
0 to 1000
*RST: 1
Example: BB:ARB:WAV:POINt?
queries the number of I/Q values pairs in the waveform file.
Response: 401
the waveform file contains 401 I/Q values pairs.
Usage: Query only
[:SOURce<hw>]:BB:ARBitrary:WAVeform:SELect <Filename>
Selects the waveform file. If the file is not on the default path, the path must be speci-
fied.
The file extension may be omitted. Only files with the file extension
*.wv
will be cre-
ated or loaded.
Parameters:
<Filename> string
Example: BB:ARB:WAV:SEL '/var/user/wave1.wv'
selects waveform file and loads it.
Manual operation: See "Load Waveform" on page 81
[:SOURce<hw>]:BB:ARBitrary:WAVeform:TAG?
The command queries the content of the specified tag of the selected Waveform file.
Return values:
<Tag> string
Example: BB:ARB:WAV:SEL '/var/user/wave1.wv'
selects waveform file and loads it
BB:ARB:WAV:TAG? 'comment'
queries the content of the
comment
tag
Response: "Sine wave for test purposes"
Usage: Query only
SOURce Subsystem