Nitsuko NVM-NT, Системное руководство

Страница: 548 / 571

Installing and/or Configuring Other Software
Installing Other Software
520
NT System Guide
Chapter 5: Maintenance
Installing Other Software
To install other software:
Q
Insert the CD-ROM into the CD drive.
A Setup menu will appear with a list of installable software components.
The following paragraphs will explain how to install the items listed on the Setup menu.
Seattle Labs Remote NT
Note: Installing the Remote NT program will require the Serial Number and Authorization Code located
in a readme.txt file on the Feature Superdisk Diskette. Be sure that you have this information
before you start the install procedure explained below.
To install the Seattle Labs Remote NT:
1. Select Remote NT on the Setup menu, and click the button.
2. Click the Yes button to continue the install.
3. On the Welcome window:
Click the button.
4. Click the Yes button to accept the license agreement.
5. Click the button when asked to check for a new version.
6. On the Contact Information window:
Enter your name in the Name box. Enter your e-mail address in the Email box. Enter your
phone number (including the area code) in the Phone box.
Click the button.
7. Click on the Register radio button, and click the Enable button.
Enter your Serial Number in the Serial Number box. Enter Authorization Code and Autho-
rization Code box. Click the Register button.
8. Click the button on the Configure RemoteNT window to continue.
9. Click the button on the Select Destination Directory window.
10. Click the button on the Select Program Group window.
11. On the Remote Administrationwindow:
Click on the line after Administrator, and enter the name CTLRemote. Click
the button to continue installation in the default directory.
12. Click the button on the Ready to Install window to continue the install.
The files will be copied to the hard drive.
13. On the Install Completed window:
Make sure that the Start RemoteNT check box is checked.
Uncheck the Visit the RemoteNT Extras Web Page check box.
Click the button.
The Setup menu will be displayed again.