Nitsuko NVM-NT Скачать руководство пользователя

Страница: 486 / 571

Voice Prompts

NT System Voice Prompts

458

NT System Guide

Chapter 4: Voice Prompts

202. Auto help is ON.

To turn auto help off, press

O (6).

To exit this feature, press the POUND key (#).

202.

203. Auto help is OFF.

To turn auto help on, press

O (6).

To exit this feature, press the POUND key (#).

203.

204. At the tone, you can leave your message for _______.

204. “...can leave your message for Peter.”

205. At the tone, you can leave a message.

205.

206. Hello. I have a message for _______.

206. “Hello, I have a message for Peter.”

207. To accept this call, press

Otherwise, hang up, and I will call

again later.

207.

208. __ Flash __

208.

209. __ Wait for dial tone __

209.

210. __ Dialing pause __

210.

211. __ Monitored dialing pause __

211.

212. Please enter the tenant number for the answering schedule over-

ride.

212.

213. Please enter the mailbox number for the instruction menu.

213.

214. Please enter the mailbox number for the announcement message.

214.

215. _______ caller waiting ahead of you.

215. “There is one caller waiting ahead of

you.”

216. Recording has been paused.

To continue recording, press the STAR key (*).
To end recording, press the POUND key (#).
For a complete list of recording options, press 0.

216.

217. _______ callers waiting ahead of you.

217. “There are two callers waiting ahead of

you.”

218. You have reached the recording limit.

To listen to the message you recorded, press

L (5).

To erase the message and record a new one, press

E (3).

To send the message, press the POUND key (#)or hang up.

218.

219. You are the next caller for the extension.

219.

220. To leave a message, press

To wait for the extension to become available, press

For other options, press

220.

221. To listen to the music on hold, press

L (5).

To record new music on hold, press

R (7).

To erase the music on hold, press

E (3).

To exit this feature, press the POUND key (#).

221.

222. You have reached the recording limit.

To backup to the beginning and listen to the recording,
press

B B (2 2).

To erase the recording and start over, press

E (3).

To end recording, press the POUND key (#).
For a complete list of recording options, press 0.

222.

Содержание NVM-NT




























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NVM-NT

Отзывы:

Похожие инструкции для NVM-NT

Бренды по названию

Популярные бренды

Nitsuko NVM-NT, Системное руководство

Результаты поиска

Содержание NVM-NT

Отзывы:

Похожие инструкции для NVM-NT

Бренды по названию

Популярные бренды