Nitsuko NVM-NT, Системное руководство

Страница: 322 / 571

Customizing Mailbox Options
Subscriber Mailboxes - Subscriber Properties Page
294
NT System Guide
Chapter 3: Programming
Call Waiting String (cont’d)
Call Announcing
This option lets the Voice Mail announce an Automated Attendant caller to the Subscriber exten-
sion. The Subscriber can then accept or reject the call. There are three Call Announcing options.
Option 1
1. When a caller tries to make a screened transfer to the Subscriber extension, the Voice Mail
says: At the tone, please record your name so that I may announce your call. When you
are done recording, press the pound key.
2. When the caller presses the pound key, the Voice Mail tries the extension. If the caller does
not press the pound key within a certain amount of time, the Automated Attendant trans-
fers the call anyway. (The time interval is the Time limit for dialing commands for the Call
Routing Mailbox handling the call.)
3. When the Subscriber answers and says Hello, the Voice Mail says this: Hello. I have a
call for (Subscriber's extension XXX or name) from (the caller's recorded name). To
accept this call, press 1. Otherwise, hang up.
4. If the Subscriber dials 1, the Voice Mail says, Connecting, then connects the parties. If the
Subscriber hangs up, the caller hears the Subscriber's mailbox greeting (if recorded) or
these voice prompts: Extension XXX (or name) is not available. To leave a message,
press 1. For other options, press 2.
If the greeting plays, a caller can leave a message, then hang up, press # for the Automated
Attendant, or re-route their call according to the options in the Next Call Routing Mailbox (for
details, see page 131.
If the extension status message plays, the caller can press 1 to leave a message or 2 to return to
the Automated Attendant Instruction Menu. After leaving a message, the caller can hang up,
press # for the Automated Attendant Instruction Menu, or press a code to re-route their call
according to the options in the Subscriber's Next Call Routing Mailbox (for details, see
Screened Transfer to an Extension on page 131.)
— If Call Queuing is enabled and the minimum number of idle
ports for Call Queuing is available. Call Queuing overrides Call
Waiting.
• The number of callers that can wait for the same extension is determined
by the telephone system.
• To set the Flash timer (if Park/Paging string requires a Flash), the Meet-Me
Page hold timer, and the Hang-up timer, use
Customize
¿
System Options
¿
Timers . (See page 332.)
• If a busy Subscriber would rather be paged instead of receive Call Waiting
beeps, you can enter the Park/Paging string in the Call Waiting string field.
The Subscriber must still turn on Call Waiting at their phone. This gives a
caller the option to page the busy Subscriber, not send beeps. For more
information, see the Subscriber Mailbox option, Park/Paging String on
page 290.
Availability: All versions of the NT Voice Mail.
Options 1 and 2 apply to the VS/DS01/DS100
Option 1 is available to all other phone systems.
Option 3 applies only to the ONYX phone systems..