Nitsuko NVM-NT, Системное руководство

Страница: 547 / 571

Installing and/or Configuring Other Software
Installing Dialogic System Software
Chapter 5: Maintenance
NT System Guide
519
To install the software for the voice board driver:
1. Click the button.
Select Programs, Dialogic System Software, and Dialogic Configuration Manager - DCM.
2. On the Dialogic Configuration Manager window:
Select Action on the menu bar, and select Add Device.
3. On the Dialogic Configuration Manager - Add Hardware Wizard window:
Select D/x1H in the Family list. Select D/41H in the Model list.
Click the button.
4. Enter BOARD1 in the D/41H box, and click the button.
5. On the DCM - Properties for D/41H board window:
Select d0000 for Address. To set D41DInterrupt to 5: Highlight D41DInterrupt, and select 5
from the Value list on the Edit info box. Click the button.
6. If there is more than one D/41H board, the remaining boards must be added and then config-
ured. Give a unique name to each board that is added and configured, but all boards must use
the same D41Dinterrupt number.
7. Click to select the MISC tab.
8. On the MISC tab:
Enter C:\VM\UTILITIES\VM_NT.PRM in the Parameter File box.
9. Click Service on the menu bar. Select Startup Modeand Automatic on the Service menu.
10. Click Service again on the menu bar. Select Start Service on the Service menu.
11. On the dialog box stating that the Dialogic System Service was started:
Click the button.
12. Close the DCM - Properties for D/41H board window (if still open).