Nitsuko NVM-NT Скачать руководство пользователя | Manualshive

Страница: 519 / 571

background image

Voice Prompts

NT System Voice Prompts

Chapter 4: Voice Prompts

NT System Guide

491

801. Please select from the following list of initialization options.

To initialize the Voice Mail database for use with a particular
      telephone system, press 1.
To hear the current Voice Mail configuration, press 2.
To configure the Voice Mail to optimize in favor of message
     storage capacity rather than message sound quality, press 3.
To configure for optimal sound quality rather than storage capacity,
    press 4.
To re-initialize the Voice Mail database, press 5.
To return to the Database Management menu, press the
POUND key (#).

801.

802. This Voice Mail system may only be initialized for use with the

current telephone system type.
To re-initialize the Voice Mail database, press the STAR key (*)
followed by the POUND key (#).

802.

803. Enter the code number for the telephone system which is to be used

with the Voice Mail, then press the POUND key (#).

803.

804. Valid code numbers are one _____.

804. “...are one through 15.”

805. Valid code numbers are one and two.

805.

806. Valid code numbers are one, two, and three.

806.

807. WARNING! All previously recorded messages will be erased ,

when the data compression rate is changed.

807.

808. WARNING! All Voice Mail parameters will be reset to their

default values, if the system is reinstalled.
Also, all previously recorded messages will be erased.
Your security code is required in order to initiate reinstallation.

808.

809. System Installation parameters may not be modified from this

    mailbox.
Only System Administrator mailboxes which have been
   programmed with a security code are permitted to reinitialize the
   Voice Mail system.

809.

810. All other Voice Mail ports are idle.

810.

811. Activity has been detected in the Voice Mail system.

To allow the activity to cease before re-initialization, press A (2).
To reinitialize immediately, press I (4).
To cancel this operation, press the POUND key (#).

811.

812. The Voice Mail database will now be updated and all messages

erased.
Please stay on the line until notified that the operation has been
completed.
The process may take up to two minutes to complete.
To cancel this operation, press the POUND key (#) now.

812.

813. Re-initialization of the Voice Mail system has been completed.

813.

814. Re-initialization of the Voice Mail system has been aborted.

814.

815. Waiting for Voice Mail activity to cease.

815.

816. Disregarding ongoing Voice Mail activity.

816.

«
...
517
518
519
520
521
...
»

Содержание NVM-NT




























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NVM-NT

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды