4.3.3 Required Environment
195
4.3 Working with MUTOH Service Assistance Software
VJ628XE-M-00
(13)Optional Function for Technician Mode
In Technician mode, the following can be done from “Option” window.
• Selecting appropriate model manually
• Check and confirmation of MSA IP address
NOTE
MSA has a function to automatically recognize model so that manual model select
function is normally not required.
Manual function is limited to use especially when installing the new firmware in a
Board without any firmware in it.
1
Start [MUTOH Service Assistance.exe]
from shortcut on desktop window.
2
Switch to Technician mode.
"(12)Switching to Technician Mode
3
From main window, select[Setup(S)] -
[Option(O)].
4
Select appropriate model name from
drop-down menu for “Model name”.
After model is selected, model-specific
functions are operable.
5
Confirm IP address is the same with
printer IP address in IP address field.
After confirmation, click [OK].
If an IP address that is different from
that of the printer is displayed, change it
to the same IP address as the printer,
and then click on “OK”.
